• Overview and historical evolution of HAZOP

• Applicability and advantages of the HAZOP method
• Preparation and conduct of HAZOP workshops
• Team composition and role allocation
• Data collection and documentation preparation
• Deviation analysis and consequence assessment
• Development and implementation of risk control measures
• Compilation and tracking of HAZOP reports
• Practical exercise: Simulation of HAZOP workshops
• Industry case sharing and discussion

• Understand the purpose and significance of HAZOP analysis and clarify its role in risk management

• Master the basic steps and technical key points of HAZOP analysis
• Successfully organize and participate in HAZOP workshops to improve team collaboration efficiency
• Accurately identify potential hazards in the process flow and propose reasonable improvement suggestions
• Write a standardized HAZOP report and take corresponding risk management solutions based on the results
• Gain opportunities to enhance personal professional abilities and increase competitiveness in the workplace

• Overview of the new energy vehicle industry and the importance of safety management
• APQP: Detailed explanation and application of Advanced Product Quality Planning
• PPAP: Process and implementation of Production Part Approval Process
• FMEA: Principles of Failure Mode and Effects Analysis
• SPC: Techniques and methods of Statistical Process Control
• MSA: Principles and application of Measurement System Analysis
• Comprehensive case analysis and practical operation
• Project management and team collaboration skills

• Understand and proficiently use the five tools: APQP, PPAP, FMEA, SPC, and MSA

• Effectively apply these tools in actual work to improve product quality and safety
• Enhance decision-making and project execution capabilities through data analysis and risk management
• Strengthen communication and coordination among teams to promote cross-departmental cooperation
• Gain cutting-edge technologies and management concepts in the new energy vehicle industry to enhance personal professional competitiveness

HOP Human and Organizational Ergonomics(3)

• Overview of HOP and its importance to enterprises
• Enhancing individual performance: Psychological, physiological, and behavioral factors
• Team performance management: Communication, collaboration, and conflict resolution
• HOP at the organizational level: Culture, processes, and change management
• Work environment design and ergonomics
• Data-driven HOP practice: Measurement and assessment
• Practical session: HOP project planning and implementation

• Clarify the role of HOP in improving individual, team, and organizational performance
• Identify and resolve efficiency bottlenecks in workflows
• Apply HOP principles to promote team collaboration and communication
• Enhance personal job satisfaction and overall well-being
• Master tools and methods for continuous improvement to drive organizational development to a higher level
• Obtain a set of practical skills and strategies to optimize the work environment and processes

• Overview of lithium-ion batteries
• Safety characteristics of lithium-ion batteries
• Safety risks and accident cases of lithium-ion batteries
• Safe use and maintenance of lithium-ion batteries
• Emergency response to lithium-ion battery accidents
• Safety management system for lithium-ion batteries
• Practical sessions and interactive discussions
• Summary and action plan

• Gain a deep understanding of the working principles and safety characteristics of lithium-ion batteries
• Master the potential safety risks of lithium-ion batteries and conduct effective risk assessments
• Learn the correct methods for using and maintaining lithium-ion batteries to reduce the probability of accidents
• Be familiar with the emergency response procedures for lithium-ion battery accidents and take correct actions in emergencies
• Acquire knowledge and tools for building and improving the safety management system for lithium-ion batteries
• Enhance the ability to combine theory with practice through case studies
• Join a professional lithium-ion battery safety community to continuously obtain the latest information and support

• Overview of mechanical safety
• Identification and assessment of mechanical risks
• Mechanical safety protection measures
• Mechanical safety standards and certification
• Mechanical safety management and maintenance
• Accident prevention and emergency response
• Mechanical safety culture construction
• Practical exercises and case studies

• Fully understand the importance and basic principles of mechanical safety
• Be proficient in using various tools and techniques for mechanical risk identification and assessment
• Effectively select and implement mechanical safety protection measures
• Clearly understand domestic and international mechanical safety standards and apply them correctly in actual work
• Develop and improve emergency response plans to enhance emergency response capabilities
• Promote the establishment of a positive safety culture in enterprises to reduce the accident rate
• Obtain an official certification to increase professional competitiveness
• Join an industry exchange community to continuously obtain the latest mechanical safety information and support

• Overview of industrial robot safety
• Risk identification and assessment of industrial robots
• Safety protection measures for industrial robots
• Safety standards and certification for industrial robots
• Safety management and maintenance of industrial robots
• Accident prevention and emergency response
• Safety culture construction for industrial robots
• Practical exercises and case studies

• Fully understand the importance and basic principles of industrial robot safety
• Be proficient in using various tools and techniques for industrial robot risk identification and assessment
• Effectively select and implement safety protection measures for industrial robots
• Clearly understand domestic and international safety standards for industrial robots and apply them correctly in actual work
• Develop and improve emergency response plans to enhance emergency response capabilities
• Promote the establishment of a positive safety culture in enterprises to reduce the accident rate
• Obtain an official certification to increase professional competitiveness
• Join an industry exchange community to continuously obtain the latest industrial robot safety information and support

Module 1: Overview of Equipment Integrity Management
Module 2: Identification and classification of critical equipment
Module 3: Inspection, testing, and preventive maintenance
Module 4: Management of equipment abnormalities and quality assurance
Module 5: Change management and continuous improvement
Module 6: Compliance with laws and regulations and employee training
Module 7: Practical exercises and case discussions

• Enhance equipment reliability: Significantly reduce unplanned downtime, extend equipment life, and lower maintenance costs through scientific and rational equipment integrity management
• Improve production efficiency: Optimize equipment performance to ensure stable and efficient operation of production lines, supporting higher output goals for enterprises
• Strengthen safety management: Follow strict safety operating procedures to effectively prevent accidents and protect employee life and property safety
• Cultivate professional talent: Systematic training content helps to develop a team of professionals with solid theoretical foundations and rich practical experience
• Promote sustainable development: Drive enterprises to transform towards greener and smarter directions, in line with current social requirements for environmental protection

• Basic knowledge of electrical safety
• Personal safety and protection
• Safety technology in power generation
• Live-line operations in distribution networks
• Electrical fire and explosion prevention
• Interpretation of laws, regulations, and standards
• Case analysis and practical exercises

• Improve professional skills: Through the study of electrical safety knowledge, participants will gain a solid professional foundation and be able to apply what they have learned to solve practical problems at work
• Strengthen safety awareness: This course emphasizes the principle of "safety first," helping participants deeply understand the importance of complying with safety regulations and developing good professional habits
• Obtain certification qualifications: After completing the entire course and passing the assessment, participants will receive a certificate issued by an authoritative institution, proving their technical level in the field of electrical safety
• Expand career development: Master advanced electrical safety management concepts and technical means to lay a solid foundation for future higher-level work
• Build a safety culture: Encourage the formation of a good atmosphere that values safety within the organization, promoting the common growth of employees

• Basic theory of static electricity
• Hazards of static electricity and case analysis
• Introduction to international standards and regulations
• Anti-static facilities and personal protective equipment
• Static electricity control technology
• On-site management and practical operations
• Emergency response plan planning
• Assessment and continuous improvement

• Fully grasp the basic knowledge of static electricity and understand the scientific principles behind it
• Significantly increase personal and team vigilance against static electricity issues and enhance safety awareness
• Learn how to effectively use various anti-static tools and technologies to reduce the incidence of accidents
• Gain the ability to design and implement static electricity safety management plans to help enterprises build a more robust risk prevention system
• Become a professional static electricity protection expert in the field, increasing workplace competitiveness

• Join a community of peers to share experiences, exchange ideas, and grow together

• Overview of warehouse safety
• Identification and assessment of warehouse environment risks
• Warehouse safety protection measures
• Warehouse safety standards and certification
• Warehouse safety management and maintenance
• Accident prevention and emergency response
• Warehouse safety culture construction
• Practical exercises and case studies

• Fully understand the importance and basic principles of warehouse safety
• Be proficient in using various tools and techniques for warehouse risk identification and assessment
• Effectively select and implement warehouse safety protection measures
• Clearly understand domestic and international warehouse safety standards and be able to correctly apply them in actual work;
• Develop and improve emergency response plans to enhance the ability to respond to accidents

• Part 1: Introduction to Basic Knowledge
• Part 2: Practical Skills Training
• Part 3: Safety Management Strategies
• Part 4: Interactive Session

• Enhance Safety: Effectively reducing the probability of workplace accidental Injuries through In-Depth understanding of material rack usage
• Improve Efficiency: Rational rack layout can greatly optimize warehouse space utilization and accelerate the turnover of goods.
• Cost Control: Proper maintenance methods help extend the life of equipment and reduce maintenance and replacement costs.
• Compliant Operation: Follow national laws and regulations to ensure the company operates within a legal framework.
• Professional Image: Demonstrate the company's care for employees and responsibility to external partners, establishing a positive corporate image.

• Overview of Material Handling
• Safety Awareness and Risk Management
• Manual Handling Techniques
• Application of Mechanical Equipment
• Trends in Automation and Intelligence
• Practical Session

• Gain a systematic knowledge system for material handling.
• Improve awareness of potential risks at work and learn how to take effective measures to reduce the incidence of accidents.
• Master the correct methods for manual handling to reduce bodily injuries caused by improper operations.
• Understand various types of handling machinery and their applicable scenarios, enhancing the ability to select equipment.
• Recognize the importance of automation technology in material handling and its role in improving corporate efficiency
• An instructional model that integrates theory with hands-on practice enables participants to directly apply what they have learned in daily work.
• Join a community of peers to share experiences, solve problems, and build professional networks

• Part 1: Basic Knowledge and Overview
• Part 2: Interpretation of Safety Standards and Laws/Regulations
• Part 3: Risk Assessment and Safety Management
• Part 4: Key Technology Analysis
• Part 5: Practical Exercises and Case Studies
• Part 6: Continuous Improvement and Future Trends Outlook

• Understand the latest standards and regulations: Master the requirements of international standards such as ISO 3691-4:2020 for autonomous industrial vehicles.
• Enhance safety awareness: Deepen the understanding of potential risks through case analysis and improve workplace safety.
• Learn best practices: Gain practical experience sharing from leading companies in the industry.
• Enhance professional skills: Acquire professional knowledge in system architecture, perception technology, decision-making and planning.
• Promote career development: Strengthen competitiveness and lay a solid foundation for future career advancement.

• Basic Knowledge of Forklifts
• Forklift Operating Procedures
• Forklift Safety Awareness
• Forklift Maintenance
• Laws, Regulations, and Standards
• Forklift Driver Management
• Practical Exercises and Case Studies

• Fully understand the importance and basic principles of forklift safety.
• Master the correct methods for operating forklifts to reduce operational risks.
• Understand key points of forklift daily maintenance to extend equipment service life.
• Clearly understand domestic and international forklift safety standards and apply them correctly in actual work.
• Develop and optimize emergency response plans to enhance emergency response capabilities
• Promote the establishment of a positive safety culture within the company to reduce the incidence of accidents.
• Obtain an official certification to increase professional competitiveness.
• Join an industry exchange community to continuously obtain the latest forklift safety information and support

• Part 1: Basic Knowledge Module
• Part 2: Core Skills Module
• Part 3: Practical Exercise Module
• Part 4: Management and Optimization Module
• Part 5: Legal and Regulatory Module

• Enhance Safety Awareness: Participants will deeply understand the importance of process layout for factory operations and how it directly affects production efficiency, employee safety, product quality, and economic benefits.
• Professional Skills Improvement: Through learning, participants will be able to master key technologies such as the safe handling of hazardous chemicals, fire and explosion prevention measures, and process thermal safety control.
• Regulatory Compliance: Familiarize with and be able to apply national laws and regulations related to safe production, such as the "Labor Law" and the "Safety Production Law," to ensure the company's lawful and compliant operations
• Risk Assessment and Prevention: Gain the ability to conduct HAZOP (Hazard and Operability Study) and HAZID (Hazard Identification) process safety analysis to effectively identify potential risk points and develop corresponding preventive measures.
• Emergency Response Capability: Enhance the ability to quickly respond to and handle emergencies, including first aid skills and fire escape techniques.
• Continuous Improvement Mechanism: Learn how to build and improve the company's internal safety management system to achieve long-term management of process layout safety

• Module 1: Introduction to Industrial Ventilation
• Module 2: Basic Principles and Fluid Mechanics Fundamentals
• Module 3: Industrial Ventilation System Design
• Module 4: Dust Control and Purification Technology
• Module 5: Case Studies and Project Practice
• Module 6: Latest Scientific Achievements and Development Trends

• Professional Skills Enhancement: Gain an in-depth understanding and mastery of the core knowledge and technology in the field of industrial ventilation to enhance personal professional skills.
• Career Competitiveness: With the increasing environmental protection requirements, professionals with good ventilation design capabilities are increasingly favored by the market.
• Broadening Horizons: Exposure to a variety of engineering project examples and the latest research findings helps to broaden your horizons and inspire new ideas.
• Networking Resource Accumulation:? Interact and exchange ideas with classmates from diverse backgrounds, building valuable professional networks and laying a solid foundation for future collaboration
• Certificate Certification: Upon completion of all courses and passing the assessment, a graduation certificate will be awarded by an authoritative organization as proof of personal qualifications

• Module 1: Overview of LOTO
• Module 2: Detailed Explanation of LOTO Procedures
• Module 3: Application Scenarios of LOTO
• Module 4: Best Practices of LOTO
• Module 5: Practical Exercises and Assessment
• Additional Content:

• Knowledge Acquisition: Gain a deep understanding of the theory and practice of LOTO.
• Skill Enhancement: Develop the ability to formulate and implement LOTO procedures.
• Regulatory Compliance: Familiarize yourself with relevant legal requirements to ensure corporate compliance.
• Safety Assurance: Effectively reduce injuries caused by uncontrolled energy.
• Cost Savings: Minimize workers' compensation claims and production downtime costs through accident prevention.

• Introduction to Occupational Health and Development Trends
• Identification of Hazards and Risk Assessment in the Workplace
• Occupational Health Monitoring and Data Management
• Prevention and Control of Occupational Diseases and Health Promotion
• Ergonomics and Workplace Design
• Emergency Preparedness and Response Mechanism
• Establishment and Operation of Occupational Health Management Systems
• Practical Session: Field Investigation and Case Discussion

• Understand the importance and basic concepts of occupational health;
• Identify and assess various health risks in the workplace;
• Use scientific methods for occupational health monitoring and data analysis;
• Develop effective occupational health protection measures to prevent the occurrence of occupational diseases;
• Improve the level of occupational health management and promote the health of employees and the harmonious development of enterprises;
• Obtain the latest information and development trends in the field of occupational health to enhance personal career competitiveness

  
  

• Overview of Contractor Safety Management
• Selection and Qualification Review of Contractors
• Development of Safety Management Clauses in Contracts
• Pre-entry Safety Training and Briefing for Contractors
• Supervision and Inspection during Construction Process
• Accident Prevention and Emergency Response
• Performance Evaluation and Continuous Improvement Mechanism
• Practical Session: Simulation Exercise of Contractor Safety Management

• Recognize the importance of contractor safety management and integrate it into the company's overall strategy.
• Effectively select and evaluate contractors to ensure they possess the necessary qualifications and capabilities.
• Clearly define safety responsibilities in contracts to mitigate legal risks.
• Monitor the safety operations of contractors and promptly identify and correct potential hazards.
• Build a good cooperative relationship with contractors to promote mutual development.
• Gain opportunities to enhance personal professional qualities and increase competitiveness in the workplace.

• Overview of Occupational Safety and Health Laws and Regulations
• Analysis of Safety Responsibilities of Personnel at All Levels
• Construction and Management of Work Safety Standardization
• Hidden Danger Identification and Rectification at Production Sites
• Emergency Response Plan Development and Drills
• Occupational Safety and Health Culture Building
• Practical Training: Work Safety Inspection and Formulation of Rectification Plans

• Accurately grasp the requirements of national laws and regulations on occupational safety and health.
• Clearly understand one's scope of responsibilities in occupational safety and health.
• Master the necessary tools and methods for occupational safety and health management.
• Enhance the ability to respond to emergencies and effectively prevent the occurrence of safety accidents.
• Strengthen occupational safety and health awareness and actively participate in the construction of corporate safety culture.
• Acquire professional knowledge in the field of occupational safety and health management to lay a foundation for personal career development

• Overview and Development Trends of EHS Management
• Introduction to EHS-related Laws, Regulations, and Standards
• EHS Risk Management and Assessment Techniques
• Establishment and Operation of EHS Management Systems
• EHS Accident Emergency Response and Handling
• Building of EHS Culture and Continuous Improvement
• Practical Session: Use and Drills of EHS Management Tools

• Understand the basic principles and importance of EHS management.
• Be familiar with domestic and international EHS legal requirements to enhance compliance.
• Identify and assess EHS risks in the workplace and implement effective prevention and control measures.
• Master the methods of establishing and operating EHS management system.
• Enhance EHS awareness and improve personal and team emergency response capabilities.
• Acquire basic knowledge of EHS management to lay a solid foundation for career development and personal growth.

• Concept and Importance of Change Management
• Basic Principles and Framework of Change Management
• Methods for Change Identification and Risk Assessment
• Design and Implementation of Change Management Processes
• Communication and Stakeholder Engagement
• Verification and Auditing after Change
• Practical Session: Simulation of Change Management Projects

?Clarify the purpose and significance of change management to enhance awareness of change management. ?Systematically master the methodology of change management and have the ability to identify change requirements. ?Use professional tools and techniques to assess the risks brought by changes and develop corresponding control measures. ?Improve internal communication mechanisms to ensure the effective transmission of change-related information. ?Increase the success rate of change projects and reduce unexpected events caused by changes. ?Acquire professional knowledge in the field of change management to support personal career development and corporate transformation

• Concept and Importance of Code of Conduct
• Interpretation of corporate culture and values
• Etiquette and communication skills in daily work
• Specific requirements for compliance with company policies and regulations
• Principles of teamwork and interpersonal relationships
• Education on integrity and professional ethics
• Case analysis: Demonstrations of correct and incorrect behaviors
• Practical session: Role-playing and scenario simulation

• To deeply understand the significance of the company's code of conduct and consciously comply with the relevant regulations.
• To master workplace etiquette and communication skills to enhance personal image and influence.
• To be clear about one's rights and obligations and avoid violations.
• To strengthen team spirit and improve relationships among colleagues.
• To demonstrate high standards of professional ethics in daily work, adding value to one's career.
• To positively influence others through exemplary behavior and jointly create a positive and healthy working environment

• Overview and Development Trends of Occupational Health
• Identification and assessment of health risks in the workplace
• Prevention and control of occupational diseases
• Mental health and stress management
• Health promotion and the establishment of an occupational health management system
• Construction of emergency preparedness and response mechanisms
• Practical session: On-site simulation of occupational health and case analysis

• To understand the importance and influencing factors of occupational health.
• To identify and assess health risks present in the workplace.
• To master basic knowledge and methods for preventing occupational diseases.
• To enhance personal psychological adjustment capabilities and skills for coping with work-related stress.
• To participate in the establishment and improvement of the company's occupational health management system.
• To gain professional knowledge in the field of occupational health and enhance personal career competitiveness.
• To contribute to creating a healthy and positive working environment

• Definition and Impact of Major Accidents
• Identification and assessment of major accident risks
• Development and drill of emergency response plans
• Emergency response and rescue at the accident site
• Recovery and reconstruction after an accident
• Establishment of a major accident prevention management system
• Practical session: Accident simulation drills and case discussions

• To identify potential major accident risk points and take effective measures to control them.
• To develop and implement emergency response plans to enhance the ability to deal with sudden accidents.
• To strengthen the construction of the company's safety management system and improve overall safety management capabilities.
• To reduce the likelihood of accidents and ensure the safety of employees' lives and property.
• To respond quickly in the event of an accident and minimize losses to the greatest extent possible.
• To acquire professional skills in the field of major accident prevention and enhance personal career competitiveness.
• To contribute to the creation of a harmonious and safe corporate culture.

• The Concept and Significance of Safety Culture
• The Role of Leaders in Building Safety Culture
• Characteristics and Development of Safety Leadership
• How to Promote Safety Culture through Leadership Behavior
• Assessment and Improvement of Safety Culture

• To deeply understand the importance of safety culture for corporate success.
• To clarify one's responsibility in shaping and disseminating safety culture.
• To promote the formation and development of corporate safety culture through effective leadership behaviors.
• To learn to use a variety of tools and techniques to assess and improve existing safety culture.
• To enhance leadership skills and become a catalyst for safety culture change in the enterprise.
• To establish a positive safety image within the company and contribute to the goal of zero accidents.

n1.引言

n2.相關方EHS管理基礎

n3.相關方EHS政策制定

n4.相關方風險評估

n5.合同中的EHS條款

n6.現場審核與績效評估

n7.溝通與協作

n8.持續改進與創新

n9.實踐環節

?全面理解相關方EHS管理的概念、重要性以及其對企業的影響；

?制定符合企業實際情況的相關方EHS政策，并推動其有效實施；

?運用科學的風險評估方法來識別和控制潛在的EHS風險；

?在合同中加入適當?shù)腅HS條款，確保相關方遵守EHS標準；

?通過有效的現場審核和績效評估，監控相關方的EHS表現；

?增強與相關方之間的溝通能力，建立積極的合作關系；

?推動持續改進文化，提升整個供應鏈的EHS管理水平；

?為企業的長期發展奠定堅實的基礎，同時減少潛在的法律和財務風險。

n1.EHS領導力概覽

n2.EHS法律法規框架

n3.建立積極的安全文化

n4.EHS風險管理

n5.高效溝通與團隊建設

n6.EHS績效測量與報告

n7.變革管理與持續改進

n8.實戰工作坊

?理解并應用EHS領導力的關鍵原則；

?通過個人榜樣作用，激發團隊對EHS工作的承諾與參與；

?制定符合企業實際的EHS戰略規劃；

?運用高效的溝通技巧，提高EHS信息的傳遞效率；

?使用科學的方法來監測和改善EHS表現；

?建立一種支持創新與持續改進的企業文化；

?獲得一套實用工具包，助力日常EHS管理工作；

?加強與其他行業同行的交流，拓展人脈網絡。

n1.設備風險管理概述

n2.設備風險辨識

n3.風險評估方法

n4.風險控制策略

n5.設備維護與安全管理

n6.持續改進與文化建設

n7.實戰工作坊

?全面了解設備風險管理的基礎知識；

?掌握多種有效的風險辨識與評估工具；

?能夠針對具體設備制定合理的風險控制措施；

?提高日常設備維護和安全管理的能力；

?促進企業內部形成良好的安全文化和持續改進機制；

?獲得處理復雜設備問題的信心和能力，提升職業競爭力。

n1.EHS基礎與重要性

n2.EHS法律法規概覽

n3.風險評估與控制

n4.應急準備與響應

n5.維修作業中的EHS最佳實踐

n6.高效溝通與團隊協作

n7.EHS績效測量與持續改進

n8.實戰工作坊

?深刻理解EHS在維修工程中的關鍵作用；

?掌握EHS法律法規的要求，并能有效應用于日常工作中；

?識別并控制維修作業中的潛在風險，確保安全操作；

?制定有效的應急預案，并具備應對緊急情況的能力；

?通過高效的溝通與團隊建設，增強員工的安全意識和參與度；

?使用科學的方法來監測和改善EHS表現；

?建立一種支持創新與持續改進的企業文化；

?獲得一套實用工具包，助力日常EHS管理工作；

?加強與其他行業同行的交流，拓展人脈網絡。

n1.《Take 5 For Safety》概述

n2.安全意識的重要性

n3.《Take 5 For Safety》五步法詳解

n第一步：停下來（Stop）

n第二步：觀察（Look）

n第三步：思考（Think）

n第四步：行動（Act）

n第五步：確認（Confirm）

n4.實踐演練

n5.持續改進與反饋機制

n6.領導力與安全文化

n7.總結與行動計劃

?掌握《Take 5 For Safety》五步法，并能在工作中靈活運用；

?顯著提高安全意識和個人責任感；

?能夠有效識別和評估工作中的潛在危害，并采取適當措施；

?為所在企業營造更加積極主動的安全文化氛圍；

?通過實際操作和案例學習，增強處理突發情況的能力；

?獲得實用工具包，包括檢查表、提示卡等，便于日常使用；

?有機會加入由行業專家組成的社群，獲得持續的學習和支持。

n人機工程學概述

n定義與歷史

n人體測量學基礎

n生物力學原理

n工作環境評估

n工作站評估工具和技術

n搬運與手動操作

n案例研究與實踐

?全面了解人機工程學的基礎知識及其在現代工作環境中的應用；

?通過科學的方法評估和改進工作站，提高員工的工作效率和舒適度；

?降低因不良工作環境引起的職業病和工傷風險；

?為所在企業創建一個更健康、更高效的工作環境；

?獲得實用工具包，包括檢查表、設計指南等，便于日常使用；

?加強與其他同行的交流，拓展專業人脈網絡；

?獲得官方認證證書，證明您的專業知識和技能水平。

n模塊一：PSM概述

n模塊二：PSM法律法規框架

n模塊三：PSM核心要素解析

n模塊四：案例研究與實戰演練

n模塊五：PSM體系建立與維護

?知識獲?。荷钊肓私釶SM的理論基礎和國際國內最佳實踐。

?技能提升：獲得制定和執行PSM計劃的實際操作能力。

?法規遵守：確保符合國家及地方有關安全生產的法律法規。

?安全保障：通過系統性的風險管理降低事故發生率。

?經濟效益：提高生產效率，減少因事故造成的損失，增強企業競爭力。

n1.PHA概述

n2.PHA方法論

n3.PHA團隊組建與準備

n4.PHA實施步驟

n5.PHA工具的應用

n6.PHA報告編寫

n7.案例研究與實戰演練

n8.持續改進與安全管理

?深入理解PHA的核心原則及其對企業安全管理的重要性；

?熟練掌握多種PHA分析方法，并能根據實際情況靈活運用；

?有效組織PHA小組，明確職責分工，順利完成PHA項目；

?準確識別和評估工藝過程中存在的潛在危害，提出切實可行的風險控制措施；

?撰寫高質量的PHA報告，并確保報告的有效傳達與使用；

?通過定期的PHA活動促進企業的持續改進，提高整體安全管理水平；

?獲得由權威機構頒發的PHA培訓證書，增強個人職業競爭力；

?加入PHA專業社群，獲取行業最新資訊，參與同行交流與合作。

n第一部分：JSA概述

n第二部分：JSA的基本原理

n第三部分：JSA的實施過程

n第四部分：JSA的實際應用

n第五部分：JSA的文化建設與持續改進

?正確理解JSA的概念及其在安全管理中的作用。

?掌握JSA的基本步驟與方法。

?學會如何有效地進行危險源識別和風險評估。

?能夠制定并實施有效的風險控制措施。

?提升團隊協作能力和溝通技巧。

?增強對安全工作的責任感和參與度。

?獲取實用的JSA模板及案例資料。

?擁有實際應用JSA的經驗，以減少事故發生率。

n一、引言與基礎概念

n二、風險管理和FMEA的基本原理

n三、FMEA的實施步驟

n第一步：項目規劃和準備

n第二步：結構分析

n第三步：功能分析

n第四步：失效模式分析

n第五步：后果分析

n第六步：原因分析

n第七步：現行控制措施評價

n第八步：風險評估（RPN計算）

n第九步：建議行動與改進

n第十步：重新評估

n四、FMEA工具和技術

n五、新版FMEA的變化與特點

n六、FMEA在不同領域的應用案例研究

n七、實戰演練與互動討論

n八、總結回顧與持續改進策略

?全面理解FMEA：從理論到實踐全方位掌握FMEA的概念、原則、流程以及最佳實踐。

?提高風險管理能力：學會運用FMEA這一強大的預防性質量管理工具，在產品開發早期階段識別并減輕潛在風險。

?增強團隊合作：通過參與小組活動和角色扮演，促進跨部門溝通協作，培養高效解決問題的能力。

?獲取官方認證：完成課程并通過考核者將獲得由專業機構頒發的FMEA培訓合格證書，為個人職業發展增添亮點。

?實際案例學習：結合多個行業的真實案例進行深入淺出的教學，幫助學員快速將理論轉化為實踐經驗。

?緊跟最新趨勢：了解最新的FMEA標準和指南，確保您的技能始終處于行業前沿。

?構建持續改進機制：掌握建立和完善企業內部FMEA數據庫的方法，推動形成良好的持續改進文化。

n模塊一：HAZOP基礎

n模塊二：HAZOP方法論

n模塊三：HAZOP應用領域

n模塊四：HAZOP工具與軟件

n模塊五：HAZOP主席的角色與職責

n模塊六：實操演練與考核

n附加內容：

?專業知識：獲得關于HAZOP原理、標準和最佳實踐的深入理解。

?實戰技能：通過模擬練習掌握進行HAZOP分析的實際操作能力。

?團隊協作：學習如何有效地領導跨學科團隊完成HAZOP分析任務。

?風險降低：學會識別并處理潛在的危害因素，從而減少事故發生的可能性。

?職業發展：提升個人在安全管理領域的專業形象，增加就業競爭力。

n一、引言與背景介紹

n二、8D的基本概念

n三、組建高效的8D團隊

n四、問題識別與定義

n五、緊急反應措施 (ERA)

n六、根本原因分析

n七、選擇并驗證永久糾正措施

n八、實施永久糾正措施

n九、預防再發生

n十、團隊祝賀與知識分享

n十一、案例研究與實戰演練

n十二、培訓考核與認證

?掌握系統化的問題解決技能：深入理解8D方法論，并能將其應用于實踐中，有效處理工作中的復雜問題。

?提升團隊協作能力：學會如何組建跨部門的高效8D小組，促進團隊成員之間的溝通與合作。

?增強數據分析能力：熟練運用多種質量工具和技術來收集信息、分析數據，從而準確地定位問題所在。

?提高決策效率：通過科學的方法篩選出最合適的解決方案，并快速采取行動以最小化損失。

?獲得專業認可：完成全部課程并通過考核后，每位學員都將被授予官方認可的8D問題解決專家證書，為個人簡歷增添亮點。

?構建持續改進的文化：不僅解決了當前遇到的具體問題，還能幫助企業建立一種積極主動尋求改進的工作氛圍，推動長期發展。

n模塊一：PFMEA基礎

n模塊二：防錯法概述

n模塊三：防錯法在PFMEA中的整合

n模塊四：實戰演練

n模塊五：高級話題與最佳實踐分享

?專業知識：全面了解PFMEA流程及防錯方法論。

?實用技能：掌握實際操作中如何實施防錯措施。

?質量改善：顯著降低產品缺陷率，提高客戶滿意度。

?成本節約：通過早期預防避免后期高昂的糾錯成本。

?團隊協作：增強跨部門合作，促進全員參與質量管理。

n1.質量領導力概覽

n2.領導者思維模式

n3.質量工具與技術

n4.團隊賦能與協作

n5.質量文化的構建

n6.持續改進與創新

n7.案例研究與實戰演練

?全面理解質量領導力的內涵及其對企業發展的重要意義；

?掌握先進的質量管理工具和技術，提升解決問題的能力；

?通過系統性和戰略性思維，更有效地進行決策和規劃；

?建立并維護一種積極向上的質量文化，促進全員參與；

?通過有效的團隊賦能策略，激發員工潛能，提高團隊凝聚力；

?制定并執行切實可行的質量改進計劃，推動組織的持續發展；

?獲得專業認證證書，增加個人職業競爭力；

n第一篇：定義階段

n第二篇：測量階段

n第三篇：分析階段

n第四篇：改進階段

n第五篇：控制階段

n第六篇：質量問題分析報告編制

?掌握系統化的方法來快速降低運營成本；

?將組織從被動模式轉變?yōu)榉e極主動的質量管理模式；

?通過分層審核保持制造/裝配過程的一致性；

?促進跨部門之間的溝通協作；

?提升ISO/TS 16949等質量管理體系的有效性；

?樹立全員參與的質量意識；

?學會使用多種工具和技術進行深入的問題分析與根本原因查找；

?制定并實施有效的短期與長期改進措施；

?建立起持續改善機制以預防同類問題再次出現；

?提高顧客滿意度和企業的整體競爭力。

n一、引言與基礎概念

n二、審核流程與方法論

n三、高級審核策略與技術

n四、內審員能力提升

n五、管理評審技巧

n六、案例分析與實戰演練

n七、法律法規解讀與合規性指導

n八、總結與答疑

?掌握全面知識：獲得關于審核過程的所有必要信息，包括理論背景、實用工具和技術。

?提升專業技能：通過深入探討各種審核方法和技巧，使學員能夠在不同情境下靈活運用，從而提高工作效率。

?增強問題解決能力：學會如何識別和處理復雜的審核挑戰，并提出切實可行的解決方案。

?獲得認證資格：成功完成培訓后，學員將獲得由知名培訓機構頒發的專業證書，這不僅是個人能力的認可，也是職業發展的重要資本。

?拓展職業視野：通過與來自各行各業的同行交流互動，拓寬人脈關系網，了解行業最新動態和發展趨勢。

?促進企業改進：幫助所在組織建立健全的質量管理體系，推動業務流程優化，最終實現企業整體績效的提升。

n模塊一：體系文件基礎知識

n模塊二：體系文件策劃原則與方法

n模塊三：體系文件的內容構成

n模塊四：體系文件的實際操作

n模塊五：持續改進與審核

?提高效率：學會制定簡潔高效的管理體系文件，減少重復勞動，提升工作效率。

?增強合規性：確保企業的運營活動符合相關國際國內標準（如ISO9001, ISO14001, ISO45001）的要求。

?加強管理質量：通過規范化的體系文件來指導日常工作，從而提高整個組織的管理水平。

?促進溝通協作：明確的責任分配和清晰的操作指南有助于跨部門間的溝通與合作。

?培養專業人才：為個人職業生涯發展提供強有力的支持，成為企業內部不可或缺的質量管理者或體系工程師。

n1.管理體系思維導論

n2.全局觀念的培養

n3.系統優化策略

n4.長遠規劃技巧

n5.目標管理與績效評估

n6.團隊領導力與激勵機制

n7.溝通與協調的藝術

n8.創新與變革管理

n9.應急響應與風險管理

n10.總結與行動計劃

?全面掌握體系思維的概念及其對企業發展的深遠影響；

?通過全局觀念更好地理解和把握整個組織的運作模式和發展方向；

?運用系統優化的方法找出并解決工作中存在的根本問題；

?制定科學合理的長遠規劃，明確組織的戰略目標和發展路徑；

?提高目標管理水平，確保所有工作都圍繞著既定目標展開；

?建立起積極向上的團隊文化，激發員工潛能，提升團隊執行力；

?改善內部溝通狀況，促進跨部門間的良好協作；

?在面對不確定性時，能夠迅速做出反應，保持組織競爭力；

?獲得官方認證證書，增加個人職業競爭力；

?加入行業交流社群，共享資源，共同成長。

nISO14001:2015標準的歷史沿革及其在全球范圍內的應用現狀；
?解析ISO14001:2015的核心條款，包括但不限于領導作用、策劃、支持、運行、績效評價及改進等；
?環境因素識別與評估的方法；
?法律法規及其他要求的合規性管理；
?內部審核與管理評審的過程及技巧；
?持續改進環境管理體系的策略與實踐

?全面了解ISO14001:2015標準的要求及其對企業環境績效的影響；
?掌握構建符合ISO14001標準的環境管理體系的關鍵技能；
?提升識別與控制重要環境因素的能力；
?學會如何通過內部審核來驗證體系的有效性；
?增強組織的合規性和社會責任感；
?提高企業在市場中的競爭力和聲譽；
?為未來的職業生涯發展打下堅實的基礎，特別是

?在環境管理和可持續發展領域。

n解釋ISO 14001:2015標準的關鍵條款及其對企業的影響。
?分享如何有效地實施和維護一個符合ISO 14001:2015標準的環境管理體系。
?講解通過認證的過程以及持續遵守標準所需的活動。
?探討環境績效指標的設定與測量方法。
?提供案例研究，展示成功實施ISO 14001:2015的實例。

?提升合規性：確保企業遵循最新的環境法律法規，減少潛在的法律風險。
?增強競爭力：通過獲得ISO 14001認證，提高企業的市場競爭力和社會責任感形象。
?優化資源利用：有效管理環境因素，實現節能減排目標，降低成本支出。
?改善內部流程：通過系統的環境管理框架，促進企業內部流程的優化與效率提升。
?培養專業人才：為參與者提供專業知識，使其成為能夠推動環境管理工作的專家。
?實現可持續發展：幫助企業確立長期的可持續發展戰略，貢獻于社會與環境保護。

nISO45001:2018標準的背景與發展歷程
?標準結構及主要條款解讀
?風險評估與控制策略
?職業健康與安全管理的關鍵要素
?實施與運行職業健康與安全管理體系的方法
?內部審核與持續改進機制
?管理評審及其重要性

?理解ISO45001:2018的核心要求及其對組織的影響
?掌握如何識別并評估職業健康與安全風險
?學會建立并維護符合ISO45001:2018要求的職業健康與安全管理體系
?培養內部審核員的能力，以確保體系的有效性和合規性
?提升組織整體的職業健康與安全管理水平，促進員工福祉

nISO 45001:2018 標準概述及核心理念解讀
?OH&S管理體系的建立與維護
?內部審核的基本概念與流程
?審核技巧與方法
?如何編寫有效的審核報告
?持續改進與不符合項管理
?實戰演練：模擬內部審核全過程

?具備ISO 45001:2018標準的知識，并能夠在實際工作中應用這些知識；
?獨立策劃并執行內部審核，評估企業的職業健康與安全管理水平；
?提出改進建議，幫助企業持續優化OH&S管理體系；
?獲得行業內認可的證書，增強個人職業發展的潛力。

n業務連續性管理概論及ISO22301:2019標準解析
?BCMS的策劃與建立
?業務影響分析（BIA）與風險評估（RA）
?業務連續性策略的制定與實施
?業務連續性計劃（BCP）的設計與演練
?內部審核的原則、實踐與技巧
?不符合項的識別與糾正措施的實施持續改進BCMS

?深入理解ISO22301:2019標準，并能應用于實踐中；
?系統地掌握業務連續性管理體系的策劃、建立和運行方法；
?獨立策劃并執行內部審核，評估BCMS的有效性；
?提出改進措施，幫助企業提升業務連續性的管理水平；
?獲得專業認證，提升個人職業發展的競爭力。

n合規管理體系概論
?ISO 37301:2021標準解讀
?合規風險管理策略
?政策制定與程序實施
?合規培訓與溝通
?監督與評估機制
?連續改進與責任追究
?實踐案例分析與討論

?深入理解ISO   37301:2021標準，并能夠在組織內推動其實施；
?發現并處理潛在的合規風險點，保護組織免受法律和財務損失；
?制定并執行有效的合規管理政策與程序；
?提高組織內外部的信任度，促進業務增長和社會責任履行；
?獲得專業認證，增強個人在行業內的競爭力。

nISO 45001標準介紹及關鍵要素解析
?安全生產標準化的概念與要求
?雙重預防機制（雙控體系）的建立與運行
?三者之間的聯系與差異分析
?一體化管理體系的設計與實施
?實踐案例分享：成功融合的經驗與教訓
?互動討論：解決實際工作中遇到的問題

?系統地理解ISO 45001、安全生產標準化及雙控體系的內涵與要求；
?結合企業實際情況，設計并實施一套融合上述三個體系的管理模式；
?提升企業的整體安全管理水平，降低事故風險；
?增強員工的安全意識和應急處置能力；
?獲取專業的培訓證書，為個人職業發展增加籌碼。

nEHS法規體系概覽
?國內外EHS法律法規詳解
?EHS法規在企業中的應用實例
?合規性評價的方法與工具
?EHS風險識別與管控策略
?案例分析：從法規到實踐的橋梁
?實踐演練：合規性評價項目策劃與實施

?準確理解并運用EHS相關的法律條款，避免違法行為發生；
?運用科學的方法對企業現有的EHS管理體系進行評價，找出不足之處；
?制定合理的改善措施，提高EHS管理水平，降低事故風險；
?在實際工作中有效防范法律風險，保障企業的合法權益；
?增強個人在EHS領域的專業能力，拓展職業發展空間。

nISO 14001環境管理體系與ISO 45001職業健康安全管理體系概述
?標準條款詳解與應用指南
?內部審核的基本概念與原則
?策劃與準備審核活動
?執行審核的方法與技巧
?不符合項的識別與報告撰寫
?審核后的跟蹤與改進措施
?實操環節：模擬審核與案例研討

?理解并應用ISO   14001和ISO 45001標準的要求；
?獨立策劃和執行內部審核任務；
?有效識別不符合項，并提出合理的改進建議；
?編寫清晰準確的審核報告；
?提升自身在環境與職業健康安全管理方面的專業素養，為個人職業發展增添砝碼；
?為企業創造更加安全、健康且環保的工作環境，促進企業的可持續發展。

n文件記錄與保存

n1.EHS管理體系的持續改進

n2.EHS合規性與最佳實踐

n3.實戰工作坊

?全面理解EHS管理體系的基本框架和運作原理；

?掌握EHS管理體系建立與運行的關鍵步驟；

?學會運用國際標準和最佳實踐來優化現有的EHS管理流程；

?提高對EHS相關法律法規的認識，確保企業的合規性；

?增強在EHS領域的專業知識和實際操作能力；

?通過案例研究和實操訓練，獲得寶貴的實踐經驗；

?獲得認證證書，為職業發展增添有力證明；

?加入EHS專業人士網絡，拓寬視野并促進職業交流。

n第一章 安全生產概論

n第二章 安全風險分級管控

n第三章 隱患排查治理

n第四章 應急管理和事故預防

n第五章 安全文化建設

n第六章 最佳實踐交流與討論

?全面的風險管理知識：學員將深入了解安全風險分級管控的基本原則、步驟以及如何進行有效的隱患排查治理。

?實用的風險評估技能：學會使用定性或定量的統計分析方法來確定風險嚴重程度，并據此制定合理的風險控制措施。

?強化的安全意識：通過案例研討、角色扮演等互動環節，增強學員對安全生產重要性的認識，提高其在日常工作中主動發現并解決問題的能力。

?持續改進機制建立：指導學員如何構建和完善企業內部的安全管理體系，確保安全隱患能夠得到及時有效地處理。

?促進企業可持續發展：幫助企業降低因安全事故導致的成本損失，??同時樹立良好的公眾形象，為企業長遠發展打下堅實基礎。